Outdoor square full viewing angle 3.5inch 2000nit high bright tft
320x480 lcd touch screen display lcd display
The YT035C004 is a 3.5-inch diagonal a-Si TFT-LCD display panel.The
3.5-inch TN HVGA uses Innolux's panel, the driver IC is ILI9488,
without a touch screen. Mainly used in video doorbell, smart home
and smart toys and other fields.
General Specifications
| Display colors | 65K /262K |
| Resolution (pixels) | 320(RGB)*480 |
| Viewing direction | 6:00 |
| Controller IC | ILI9488 |
| Active Area | 48.96(W) x 73.44(H) |
| Outline dimensions | 54.50 (W) x 83.00(H) x 2.5(D) |
| Interface type | RGB |
| Backlight | 6 CHIP WHITE LED |
| Operating temperature range | -20----70 °C |
| Storage Temperature range | -30----80 °C |
| Certification of registration | ISO9001:2008 |
Outline Dimension (unit: mm)
Related Products
| Size | Model No. | Resolution | Outline dimension
(LCM) H*V*T(mm) | Interface | View direction |
| 2.31 | YT023H003 | 320*240 | 50.80*45.80*2.46 | MCU/SPI | 12 O'Clock |
| 2.4 | YT024H001 | 240*320 | 42.72*60.26*2.25 | MCU | 12 O'Clock |
| 2.4 | YT024C017 | 240*320 | 42.72*60.26*2.25 | SPI+RGB/MCU | ALL |
| 2.8 | YT028H003 | 240*320 | 50.00*69.20*2.40 | MCU | ALL |
| 2.8 | YT028I001 | 240*320 | 50.00*69.20*2.40 | MCU | 12 O'Clock |
| 3.5 | YT035F001 | 320*480 | 54.66*82.94*2.20 | MIPI | 12 O'Clock |
| 3.5 | YT035C025 | 320*480 | 55.00*84.71*2.25 | MCU/SPI | ALL |
| 3.5 | YT043H007 | 480*800 | 62.46*105.9*2.20 | SPI+RGB | ALL |
| 4 | YT043H012 | 480*800 | 62.46*105.9*2.20 | MIPI | 12 O'Clock |
| 4.3 | YT445H006 | 480*854 | 60.04*109.42*1.95 | RGB | ALL |
| 4.5 | YT045I001 | 480*854 | 60.00*109.00*1.85 | MIPI | ALL |
| 5 | YT050B008 | 720*1280 | 64.70*118.70*1.55 | MIPI | ALL |
| 5 | YT050C001 | 1080*1920 | 64.9*119.75*2.2 | RGB | ALL |
| 5 | YT055H005-V1 | 480*800 | 70.34*128.11*2.05 | RGB | ALL |
| 5.5 | YT055B001 | 1080*1920 | 71.00*129.56*1.50 | MIPI | ALL |
Why Choose us:
1. Our company established in 2011, and have a long-term
cooperation with many well-known company.
2. We have a professional r&d team and technical support.
3. We have a large number of spot inventory and we can ship
delivery asap after payment.
4. We are direct agent of these brands,ordering process simple and
delivery time short.
PRECAUTIONS
1. HANDLING
1.1. Polarizer Cleaning, Petroleum ether (or N-hexane) is
recommended for cleaning the front/rear polarizers and reflectors,
acetone, toluene and ethanol are not allowed to avoid damaging the
surface.
1.2. Body grounding, must wear Anti-ESD wrist strap while pick up
LCDs.
1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on
grounding bench.
1.4. If use electric Screwdriver to do assembly, screwdriver must
be grounding.
2. STORAGE
2.1. Keep in a sealed polyethylene bag.
2.2. Keep in a dark place.
2.3. Keep in temperature between 0°C and 35°C.
NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than
48 Hrs.
3. SAFETY
If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch
your skin or clothes, please wash it off immediately using soap and
water.
4. LIMITED WARRANTY
Unless otherwise agreed between ADIA and customer, ADIA will
replace or repair any of its LCD modules which are found to be
functionally defective when inspected in accordance with ADIA LCD
acceptance standards (copies available upon request) for a period
of one year from date of shipments. Cosmetic/visual defects over
specs must be returned to ADIA within 30 days of shipment.
Confirmation of such date shall be based on freight documents. The
warranty liability of ADIA limited to repair and/or replacement on
the terms set forth above. ADIA shall not be responsible for any
subsequent or consequential events.
4.1 RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS
4.1 No warranty can be granted if the precautions stated above have
been disregarded. The typical examples of violations are :
- Broken LCD glass.
- Circuit modified in any way, including addition of components.
4.2. Module repairs will be invoiced to the customer upon mutual
agreement. Modules must be returned with sufficient description of
the failures or defects. Any connectors or cable installed by the
customer must be removed completely without damaging the PCB’s
eyelet, conductors and terminals.
